Jetour T2 physical button installation process #jetour #jetourt2 #jetourt1 #chery #chinesecars

Summary

Key Points

• Begin the installation process by firmly grasping and pulling the lever upwards to remove it. 0:06
• Next, use a seesaw tool to carefully raise and detach the center console panel. 0:11
• Open the glove compartment and disconnect the white plug connected to the driving mode wire located underneath. 0:19
• Proceed to remove the air vent by slightly lifting both sides and applying force to release the surrounding clasps. 0:36
• Connect the double flash plug from the new component to the original car's connector, then plug the other end into the position where the original center console panel was removed. 0:58
• Cover the central control panel and connect the two wires to the original car's air vent, ensuring the black wire goes into the double hazard warning light slot and the white wire into its corresponding white slot. 1:10
• Fasten the new switch wire to the original car hazard switch, aligning the buckle before pressing upwards with force. 1:24
• Complete the installation by pushing the lever straight down until it is securely in place. 1:29
• The video concludes by showcasing the finished product and providing a website for more information. 1:35